The Ultimate Polaris RZR Armor Kit

Ricochet Skid Plates for your Polaris RZR.   Two machines do not come with skid plates, one is the Can-Am ATV and the other is the Polaris. Polaris has basically built a steel skid plate into its frame which offers some protection; but most owners, after testing their Polaris ATV/UTV in rocky areas, affirm their need of a quality set of skid plates installed on their machines.

Ricochet makes some of the best undercarriage protection for your ATV, UTV or side by side. Polaris ATV/UTV owners who have the Ricochet skid plates installed will immediately realized how essential these skid plates are on this particular machine. The cost of frame damage and torn CV boots alone, or simply the idea of being stranded out on a trail justifies the cost of these skid plates.

Ricochet skid plates for the Polaris provide complete coverage for the underbelly of the vehicle. The longer wheelbase and lower stance makes the Polaris hit a few more rocks than Quad does.

Ricochet front a-arm guards protect the vital CV boot area with the rear section open to allow for easy run out of water, mud or snow. The rear a-arm guards completely enclose the CV boots and axles area. This area easily gets packed with mud and snow, so some care needs to be taken to keep the area clean.

Another great thing about these Ricochet skid plates is that they allow complete access to all of the service points on your Polaris. This prevents you from having to remove the skid plates in order to perform general maintenance like fluid changes.

We have the Front & Rear A-Arm Guards, the Front & Rear Differential Plates and the Full Frame Skid Plates available for your Polaris RZR. You can purchase each skid separately as needed; or we also offer a Complete Package that includes all the above skid plates. These are custom-built by Ricochet to fit the 2008-2010 Polaris RZR (Not S-model) and the Polaris RZR S-model ATV/UTV.

Ricochet Full Frame Skid Plates for Polaris RZR

• Constructed from 3/16" (.190) Clear Anodized Aluminum for a corrosion resistant finish.
• Provides frame and engine protection.
• Requires a T40 Torx Wrench ($1.99) to install. Click the Drop Down Box below to add one to your order. (No need to add a T40 Torx Socket Bit when ordering the Full Frame Plate.)

Ricochet Front & Rear Differential Skid Plates for Polaris RZR

• Constructed from 3/16" (.190) Clear Anodized Aluminum.  
• Protects the front and rear differentials, provides some frontal frame protection while the rear skid plate provides protection for the rear frame tubes.  
• Adds much needed strength and support to the mounting of the rear end, eliminating broken frames and helping you avoid frustrating and costly breakdowns in the most inconvenient places.
• Requires a T40 Torx Wrench ($1.99) to install. Click the Drop Down Box below to add one to your order. (No need to add a T40 Torx Socket Bit when ordering the Front & Rear Differential Guards.)

  Ricochet Front & Rear A-Arm Guard Set for Polaris RZR

• 4-Piece Set constructed from 5/32" (.160) Aluminum.
• Protect your a-arms from rock damage by allowing your ATV to slide over rocks and obstacles.
• Cutouts installed wherever needed to facilitate oil and filter changes.
• Requires a T40 Torx Wrench ($1.99) to install. Click the Drop Down Box below to add one to your order. (No need to add a T40 Torx Socket Bit when ordering the Front & Rear A-Arm Guards.)
• Click on the Drop Down Box next to "CUSTOM FRONT & REAR A-ARM GUARD COLOR" to choose desired color.

Ricochet Complete Skid Plate Set for Polaris RZR

• Includes the Full Frame Guards, the Front & Rear Differential Guards and the Front & Rear A-Arm Guards.
• Requires the T40 Torx Socket Bit ($4.99) to install. Click on the Drop Down Box next to "T40 TORX SOCKET BIT" to add one to your order. (No need to add a T40 Torx Wrench when ordering the Complete Skid Set.)
• Click on the Drop Down Box next to "CUSTOM FRONT & REAR A-ARM GUARD COLOR" to choose desired color.

NEW!! CUSTOMIZE YOUR ANODIZE COLOR ON A-ARM GUARDS

1. To view custom color examples, see the four (4) "Detailed Images" below.
2. Click on the Drop Down Box next to "CUSTOM FRONT & REAR A-ARM GUARD COLOR" to choose desired color. ( No need to choose color when making an order for the Full Frame Skid Plates or the Front & Rear Differential Guards.)

Click on the Drop Down Box below next to "SELECT SKID" to see Images and Pricing.