Polaris RZR XP1000 and 2015-20 RZR 900 Extreme Front Bumper / Brush Guard with Winch Mount

NOTE: This will fit the Turbo Model,see notes below.

• Made from 1/8" thick and 3/16" thick American Steel.
• Powder coated texture black for superior protection.
• Mounts behind the radiator, unlike factory bumpers.
• Fits most winches up to 3500 lbs.
• Allows you to mount your winch up high out of the mud and water or behind the radiator (see notes below if mounting behind the radiator).
• Top Mounting Accepts both wide Spool UTV Winches (6-5/8” x 3” deep, bolt pattern) and Standard Spool UTV Winches (4-7/8” Wide x 3” Deep, Bolt Pattern).
• Laser Cut and CNC Formed to ensure a perfect fit.
• Laser Cut EMP Logo.
• Made in the USA

If you are mounting a winch behind the radiator you will need a winch mount P/N: EMP- 12363 and an additional Fairlead (see install video).

NOTE: Due to frame restrictions if you are mounting a behind the radiator you will not be able to use a wide spool winch. If mounting a winch on top you will only need the fairlead bracket that comes with your winch. If you do not have a fairlead bracket for some reason we do make one it is P/N: EMP-10906.

If you have a turbo model you will have to trim a small slit into the front fascia P/N: 5453075-070 for the arms that go back the frame. This will mostly be hidden behind the bumper. The turbo models have wider front Fascia. This is the 2017-18 models only. On the 2016 Models the front fascia was three pieces so the side pieces just have to be removed.

Polaris RZR XP1000 and 2015-20 RZR 900 Extreme Front Bumper / Brush Guard with Winch Mount