Can-Am Commander Deluxe Plug & Play Turn Signal Kit

Want to take your Commander on the street? This turn signal kit gets you there. You get four front amber LEDs for visibility, all the wiring you need, and a horn to round things out. Since everything plugs together with color-coded connectors, you can bolt it on without a ton of hassle. The rear signals tap into your existing brake lights, so no extra work back there.

Built to Handle Water and Mud

Off-road rigs see wet conditions all the time, so the control box on this kit is sealed tight and rated to IP67 standards. That means it'll keep working even if you submerge it in three feet of water for half an hour. All the connectors are water-resistant plugs coated with dielectric grease to fight corrosion and keep everything safe.

Skip the Drill — Go with Adhesive Strips Instead

The standard setup needs a couple holes drilled into your plastic panels. If that's not your thing, you can swap in 6 or 12 LED adhesive strips instead. They stick on with 3M automotive-grade adhesive and plug straight into the kit's harness. You can run up to four strips, or mix them with the standard button lights if you want.

What You Get

• Pre-wired harness with color-coded plugs — ready to connect
• Dash-mounted rocker switch for turn signals with built-in indicator light
• Hazard light rocker switch
• Horn switch and compact horn
• Four front amber LED turn lights (two per corner)
• Rear signals wired to factory brake lights
• Sealed, water-resistant control box with bracket
• Dielectric grease for plug protection
• All bolts, brackets, and hardware

Fitment

• Can-Am Commander 800 : 2011-2020
• Can-Am Commander 800 Max : 2016-2020
• Can-Am Commander 1000 : 2011-2020
• Can-Am Commander 1000 Max : 2014-2020

Note: Road-legal requirements differ by state. Check your local rules before hitting public roads.