Can-Am Commander Plow Pro Snow Plow

Winter maintenance doesn't have to be a backbreaking job. This 72" snow plow blade mounts straight to your Can-Am Commander and lets you clear driveways, parking areas, and rough terrain without leaving the seat. The quick-connect system goes on in minutes, and it stays bolted to your machine year-round—no need to pull it off when spring rolls around.

This plow is made tough from the ground up. The main blade is 10-gauge steel, while the front edge steps up to 4-gauge steel for serious impact resistance against packed snow and ice. Two 4-gauge vertical ribs brace the high-stress areas, and a 10-gauge horizontal support runs behind the leading edge to keep everything solid. If you hit something hard, the blade tilts forward instead of bending, and the wear point is a simple replaceable pin you can swap out in your garage.

You get seven different blade angles to work with—swing it left or right (0°, 10°, 20°, or 30° from center) depending on which way you're pushing snow. The attack angle adjusts between 52° and 65°, so you can dial in the perfect bite. Skid shoes are height-adjustable too, which keeps your blade sitting flat and lets you fine-tune your clearing angle. The winch-operated system moves smooth and quick.

The base kit includes the 72" blade, the quick-connect mount that bolts to your Commander, and the plow frame. You'll need a winch to operate it—that's not included. If you want extra convenience, a deluxe accessory kit is available separately with side shields (3/16" steel), plow edge markers (23"), a snow deflector (1/8" LDPE plastic), and a dash-mounted angle actuator with an 1,800 lb. electric cylinder so you can adjust the blade angle from inside the cab.

• Can-Am Commander 800 : 2010-2020
• Can-Am Commander 1000 : 2010-2020
• Can-Am Commander 1000R DPS : 2021+
• Can-Am Commander 1000R XT : 2021+
• Can-Am Commander 1000R XTP : 2021+
• Can-Am Commander Max 1000R DPS : 2021+
• Can-Am Commander Max 1000R XT : 2021+

Note: If your Commander sits more than 3" higher from a lift kit, you'll need the Plow Pro drop bracket (SPB-DB-001), sold separately.