Can-Am Maverick X3 Plow Pro Snow Plow

When winter hits hard, you need a tool that'll handle serious snow removal work. This 72" snow plow blade cuts through whatever the season throws at you—whether it's your driveway, a parking lot, or helping out neighbors. SuperATV built this plow kit specifically for your Can-Am Maverick X3, so it bolts on tight and works with your machine's power to move snow fast. With quick-connect mounting, you can attach or remove the blade in just a few minutes when you need to switch tasks.

Heavy-Duty Steel Construction That Lasts

The blade is built from 10-gauge steel and reinforced with two 4-gauge vertical ribs where it takes the hardest hits. The cutting edge itself is 4-gauge advanced steel alloy—thick enough to slice through packed snow without bogging down. A 10-gauge horizontal support runs across the back to keep everything rigid. All mounting hardware gets a powder-coat finish to fight rust and corrosion, so this plow works year after year without falling apart.

Seven Angles Plus Tilt Control

You get seven different blade angles to work with: 0°, 10°, 20°, and 30° in either direction from center. The cutting attack angle adjusts between 52° and 65° depending on what you're clearing. Height-adjustable skid shoes keep the blade where you want it. With up to 3" of lift adjustment, you can keep the blade flat or angled however makes sense for the job.

What You Get

• 72" snow plow blade
• Quick-connect mount system
• Snow plow frame

Optional Deluxe Accessory Kit

Add the deluxe kit for more control and convenience. It includes two 3/16" steel side shields to keep your plow line clean, a 1/8" LDPE deflector to stop snow spray over the top, twenty-three reflective markers for visibility, and a plow angle actuator. That actuator lets you adjust blade angle right from a dash-mounted switch using an 1,800 lb. electric actuator—no getting out in the cold to change it manually.

Important: You'll need a winch to operate this plow. Some machines with more than 3" of lift also need our Plow Pro drop bracket (SPB-DB-001), sold separately. Your X3 may also require a frame stiffener kit or gusset kit.

Fitment Notes

This plow fits 64 Can-Am Maverick X3 models from 2017–2021, and there are 25 different 72" blade models listed for 2017–2022+. Check the fitment list carefully for your exact year and trim—some configurations require additional brackets or reinforcement kits.