CFMOTO UForce 1000 Plow Pro Snow Plow

Got snow to move? This 72" snow plow blade bolts straight to your CFMOTO UForce 1000 and tackles driveways, parking lots, and everything in between. No more wondering if your UTV can handle winter work—with the right plow, you're ready to go as soon the snow falls.

The kit includes the 72" blade, a quick-connect mount that stays on your machine year-round, and the full plow frame. Since it bolts on without any drilling, you can install it once and leave it there. When a storm hits, you just attach the blade and you're working. Takes minutes to hook up or take off.

The blade body is 10-gauge steel, and the cutting edge is 4-gauge advanced steel alloy—that's the stuff that actually hits the ground and takes the beating. Two 4-gauge vertical ribs run down the sides to handle impacts, and a 10-gauge horizontal support sits behind the edge to keep everything straight. There's a tilt-forward design with shock-absorbing springs so you don't trash the plow when you hit a hidden curb or rock. All the metal gets powder coated so it won't rust out on you.

You get seven different plowing angles—0°, 10°, 20°, and 30° in either direction from center. The blade also tilts at 52° to 65° for the angle it hits the snow. Height-adjustable skid shoes let you dial in clearance so you're not scraping asphalt. The whole thing runs on a winch system that's responsive and straightforward to operate.

If you want more features, SuperATV offers a deluxe accessory kit. You get two 3/16" steel side shields to keep your plow line clean, 23" plow markers so people can see your blade edges, a 1/8" LDPE deflector to stop snow from flying over the top, and a plow angle actuator with an 1,800 lb. motor. That actuator sits on your dash so you can adjust angle from inside the cab.

• CFMOTO UForce 1000: 2019+

Important: You'll need a winch to run this plow. If your machine has more than 3" of lift, you'll also need our Plow Pro Snow Plow drop bracket (SPB-DB-001).