Polaris Ranger XP 1000 Plow Pro Snow Plow

Winter maintenance doesn't have to be a battle. This 72" snow plow blade mounts straight to your Polaris Ranger XP 1000 and clears driveways, parking areas, and roads without the back-breaking work. Quick-connect design means you can have it ready to go in minutes, then remove it just as fast when you're done. Seven different angling positions let you tackle any surface and snow condition with the right attack.

Built Tough for Real Work

The blade itself is 10-gauge steel—thick enough to handle heavy, packed snow and break through ice. Up front, you get 4-gauge steel reinforcement where impacts happen most. Two vertical ribs (also 4-gauge) run the length of the blade's high-wear zones, with a 10-gauge horizontal brace backing up the leading edge. If you do catch a rock or stump, the design fails at an easy-to-replace adjustment pin rather than causing serious damage to the whole frame. Shock-absorbing springs and a flip-forward design add another layer of protection against rough impacts.

Positioning Options That Actually Work

You can angle the blade left or right—0°, 10°, 20°, or 30° off center—so you're always pushing snow in the direction you want. Attack angle adjusts from 52° to 65°, and your skid shoes move up and down to keep contact with the ground. A winch-operated system makes angle changes smooth and quick, so you spend less time fiddling and more time plowing.

What You're Getting

• 72" snow plow blade
• Quick-connect mounting frame
• Snow plow frame

Mount and Accessories

The quick-connect mount bolts onto your Ranger with zero drilling. Blade and frame attach with two quick-release pins, so swapping takes just minutes. You can leave the mount on year-round. SuperATV also offers a deluxe accessory kit sold separately that adds side shields (3/16" steel), 23" plow markers for visibility, a snow deflector (1/8" LDPE) to keep snow from rolling over the blade, and a dash-mounted plow angle actuator with an 1,800 lb. electric cylinder so you can control angle from inside the cab.

What You Need to Know

A winch is required to operate this plow. If your Ranger sits more than 3" higher than stock, you'll need the separate Plow Prow drop bracket (part SPB-DB-001). This plow does not work with OEM bumper 1025341 and is not compatible with Big Game, High Lifter, or Waterfowl editions.

Fits These Rangers

• Polaris Ranger XP 1000 (2018+)
• Polaris Ranger XP 1000 Crew (2019+)
• Polaris Ranger XP 1000 Back Country Edition (2019)
• Polaris Ranger XP 1000 Back Country Crew Edition (2019)
• Polaris Ranger XP 1000 NorthStar Edition (2019+)
• Polaris Ranger XP 1000 NorthStar Edition Crew (2019+)
• Polaris Ranger XP 1000 Texas Edition (2020+)
• Polaris Ranger XP 1000 Texas Edition Crew (2020+)
• Polaris Ranger XP 1000 Trail Boss (2021+)
• Polaris Ranger XP 1000 Trail Boss Crew (2021+)