Polaris Ranger XP 570 Plow Pro Snow Plow

Clearing snow off your driveway or parking area gets old fast—especially when you're doing it by hand or with basic tools. A winch-operated snow plow lets your Polaris Ranger XP 570 handle the heavy lifting. The 72" blade cuts through packed snow and ice efficiently, and you control everything from the cab using your machine's existing winch. Adjust the blade angle on the fly to match whatever terrain you're working with, then disconnect it in minutes when you're done.

Built to Take a Beating

Snow plowing is tough on equipment, so this blade doesn't cut corners. The main blade is 10-gauge steel—thick enough to withstand constant contact with hard ground and frozen debris. The leading cutting edge uses even heavier 4-gauge advanced steel alloy to stay sharp and resist damage. Two vertical 4-gauge ribs reinforce the high-impact zones, and a 10-gauge horizontal support beam strengthens the cutting edge further. The whole assembly includes shock-absorbing springs and a flip-forward design so the blade deflects on impact rather than crumpling.

Angle Control

You get seven different plowing angles to choose from—0°, 10°, 20°, and 30° in both directions from center. This gives you the flexibility to push snow to either side or straight ahead depending on your situation. The blade's attack angle adjusts between 52° and 65°, and height-adjustable skid shoes let you dial in clearance even if your machine sits up to 3" higher than stock. Winch operation is straightforward and responsive, so lining up your next pass takes seconds.

Quick On, Quick Off

The mounting frame bolts directly to your Polaris Ranger with no drilling required. It stays on year-round without interfering with other factory components. When snow arrives, slide the plow blade onto the quick-connect mount—the whole job takes a couple minutes. When spring comes, disconnect the blade and you're ready to move on to other tasks.

Optional Add-Ons

There's a deluxe accessory kit available if you want extra conveniences. It comes with side shields made from 3/16" steel to keep snow contained within your plow path, 23" tall plow markers so you can see the blade's edges in poor visibility, a 1/8" LDPE deflector to prevent snow from spilling over the top, and a plow angle actuator. That actuator is the real time-saver—mount a switch on your dash and control the blade angle from inside the cab using an 1,800 lb. electric actuator. No getting out of the truck to fiddle with manual adjustments.

What You Get

Standard Kit:

• 72" snow plow blade
• Quick-connect snow plow mount
• Snow plow frame

Deluxe Accessory Kit (sold separately):

• Two snow plow side shields
• Deflector and marker kit
• Plow angle actuator kit

Important Notes

You'll need a winch installed on your machine to operate this plow. Machines with suspension lift kits greater than 3" require an additional drop bracket (SPB-DB-001, sold separately) to maintain proper blade geometry. This plow is not compatible with the SuperATV Front Bumper FBG-P-RAN09XP.

Fits These Models

• Polaris Ranger XP 570: 2015-2016
• Polaris Ranger XP 570 Crew: 2015-2016