Ranger XP 800 Plow Pro Snowplow

When winter hits hard, you need a way to clear snow fast without breaking your back. This snow plow mounts right to your Polaris Ranger XP 800 and gets to work in minutes. The blade angles seven different ways, tilts to match your terrain, and swaps on and off with a quick-connect system whenever you need it.

The blade itself is 10-gauge steel, which can take serious punishment season after season. The cutting edge is even heavier — 4-gauge advanced steel alloy — so it won't dull or bend when you're scraping ice and packed snow. Two 4-gauge vertical ribs run down the back to reinforce high-stress spots, and a 10-gauge horizontal support beam runs behind the leading edge for extra stiffness. The whole thing tilts forward on shock-absorbing springs, so when you hit something solid, the blade gives instead of breaking.

You get seven different blade positions to angle left or right — at 0°, 10°, 20°, or 30° from center. That's huge when you're working slopes or narrow spaces. The attack angle adjusts from 52° to 65°, and height-adjustable skid shoes let you dial in the perfect cutting height. Even if you're running up to a 3-inch lift, you can tilt the whole plow to sit flat and work right.

The mounting plate bolts straight to your Ranger with no drilling or cutting required. Once it's on, you can leave it there year-round — it stays tucked and out of the way until you need it. When a snow storm rolls in, the quick-connect lets you attach the blade in minutes and get moving.

If you want to make plowing even easier, there's a deluxe accessory kit available. It adds side shields (3/16 steel), 23 plow markers for visibility, a 1/8-inch LDPE deflector to stop snow from rolling over the top of the blade, and a plow angle actuator. The actuator ties to a dash switch and uses an 1,800 lb. electric motor — so you can stay warm in the cab and adjust your angle without getting out.

• 72-inch snow plow blade
• Quick-connect snow plow mount
• Snow plow frame

Deluxe Accessory Kit Contains:

• Two side shields
• Deflector and marker kit
• Plow angle actuator kit

• Polaris Ranger XP 800: 2010–2014
• Polaris Ranger XP 800 6x6: 2010–2016
• Polaris Ranger XP 700: 2009

Important Notes: A winch is required to operate this plow. If your machine sits higher than 3 inches, you'll need the Plow Prow Snow Plow drop bracket (SPB-DB-001), sold separately. This plow works with the SuperATV Front Bumper (FBG-P-RAN09XP) or your OEM bumper only.