Polaris Ranger XP 900 Plow Pro Snow Plow

If you're running a Polaris Ranger XP 900, a snow plow turns your machine into a real workhorse when winter hits. This 72" blade lets you clear driveways, parking areas, and roads instead of sitting idle for months. The whole setup bolts on without drilling, and you can take it off in minutes whenever you don't need it—the mounting plate stays put year-round.

Built to Handle Heavy Work

This plow is made from serious steel because it's going to take a beating. The blade itself is 10-gauge steel, but the cutting edge—the part that actually hits packed snow and ice—is beefier at 4-gauge advanced alloy. SuperATV reinforced the whole thing with support ribs in the spots that take the most abuse. You also get shock-absorbing springs and a tilt-forward design, so the blade gives way instead of breaking when it hits something solid.

• 10-gauge steel blade construction
• 4-gauge advanced alloy cutting edge
• Two 4-gauge vertical ribs at high-impact zones
• 10-gauge horizontal reinforcement behind the leading edge
• Spring-loaded tilt-forward design for impact protection

Angles and Adjustment You Actually Need

You get seven different plowing angles—0°, 10°, 20°, and 30° to the left or right of center. That means you can angle the blade to push snow to the side without having to swing the whole machine around. The blade also tilts up to 3" for uneven ground, and the attack angle adjusts between 52° and 65° so you can dial in the right bite. Height-adjustable skid shoes let you protect the blade and control how deep it cuts.

What Comes In The Box

• 72" snow plow blade
• Quick-connect snow plow mount
• Snow plow frame

Optional Accessories

There's a deluxe accessory kit available separately if you want to go further. It includes two side shields made from 3/16" steel to keep your plowing line clean, 23 plow markers so you can see the blade edges in low light, a 1/8" LDPE deflector to stop snow from rolling over the top, and a plow angle actuator with an 1,800 lb. motor. The actuator hooks to a dash switch so you can change the blade angle from inside your cab without getting cold.

What You Need To Know

A winch is required to operate this plow. If your machine has more than 3" of lift, you'll need a separate drop bracket (SPB-DB-001). This plow works with the SuperATV Front Bumper (FBG-P-RAN09XP) or your OEM bumper.

Fitment

• Polaris Ranger XP 900: 2013-2019
• Polaris Ranger XP 900 Crew: 2014-2019