Polaris RZR PRO XP Sidewinder A-Arms—1.5" Forward Offset

These boxed A-arms bolt onto your Polaris RZR PRO XP and give you what the stock setup can't—an extra 1.5 inches of ground clearance, a 1.5-inch forward offset, and the ability to run tires up to 34 inches. The forward offset geometry means better handling over rough ground and obstacles. You also get a complete tie rod kit, extended brake lines, and all the hardware to get rolling. If you want to drop bigger rubber on your rig without worrying about clearance, this is the shortcut.

Built Solid

The arms are boxed steel construction made from 1/8-inch advanced alloy plating. SuperATV finishes them with a UV-resistant powder coat that stands up to sun and dirt. They're backed by a lifetime warranty and come tested both in the lab and in the field, so you know they'll handle whatever you throw at them.

Adjust Your Camber

The kit comes with adjustable pivot blocks so you can dial in the camber angle to suit your setup. If you're adding a lift kit, bigger tires, or carrying a load, camber adjustability keeps tire wear even and lets you fine-tune how the rig handles. Out of the box, they're set to stock specs—if you don't need to mess with it, you don't have to.

Tie Rods Built for Trail Abuse

The heavy-duty tie rod kit that comes with these A-arms uses chromoly ends designed to keep you in control when you're pushing hard. They're matched to handle the offset geometry of the arms and won't leave you second-guessing your steering.

Ball Joint Options

You get two choices here. The Super Duty 300M joints use the strongest ball joint steel on the market and sit 2.25 times stronger than stock. Both options come with grease zerks for easy maintenance and an adjustable steel-on-steel design. If you pick either ball joint option at checkout, SuperATV will install them free—that saves you the time and hassle of doing it yourself. If you skip the joint upgrade, you'll reuse your stock ball joints.

What You Get

• Upper and lower front offset A-arms
• Heavy-duty tie rod kit
• Extended brake lines
• All fasteners and instructions

Fitment

• Polaris RZR PRO XP: 2020+
• Polaris RZR PRO XP 4: 2020+