Polaris RZR S 1000 7-10" Lift Kit

Need more ground clearance on your Polaris RZR S 1000? This 7-10" lift kit is the answer. Whether you're tackling gnarly terrain, plowing through deep mud, or just want room for massive tires, a proper lift gives you the space to handle it all without getting hung up.

Built to Last

We've been building lift kits for decades, and it shows. The A-arms are made from 1-1/4" heavy-duty steel tubing, while the Z-bend tie rods are solid 7/8" steel. Every lift bracket is hand-welded steel. This isn't just strong—it's built to take a beating. We stand behind it with a lifetime warranty on the A-arms, tie rods, and brackets, so you can push hard without worrying.

Real Clearance, Real Tire Clearance

When we say 10" of lift, we mean it. That translates to 22.5" of ground clearance (up from 12.5" stock) and room to fit 36" tires instead of the stock 27". Your wheelbase stretches from 79" to 82", and your width goes from 60" to 73". You get the room you need without cutting or modifying the frame.

Stays Nimble

The problem with big lifts? They turn like a school bus. We engineered the shocks at an angle so your turning radius stays tight and your ride stays smooth. You get the height without sacrificing how the machine handles or feels underneath you.

Axle Options

You can run this with stock axles, but there's a better choice: X300 axles. These use 300M steel shafts with maxed-out CVs. The 300M steel flexes under load instead of snapping, which absorbs shock that would normally destroy your CVs, differential, or transmission. It's the smarter move if you're running a lifted machine hard.

What You Get

Your lift kit is sized true-to-spec and ready to install. SuperATV's steel construction means years of reliable service.

Fitment

• Polaris RZR S 1000: 2016-2020
• Polaris RZR S4 1000: 2019-2020

Note: If you're keeping stock wheels or running 12" wheels, you'll need one wheel spacer.