Polaris RZR Trail S 900 High Clearance 1.5" Rear Offset A-Arms

When you're pushing your Polaris RZR Trail S 900 hard on the trail, stock rear A-arms can hold you back. They don't give you the clearance you need to clear rocks and rough terrain without bottoming out, and they limit how big your tires can get. These High Clearance 1.5 Rear Offset A-Arms fix that problem by giving you more ground clearance, a longer wheelbase, and room to fit larger rubber—no lift kit required.

More Clearance, Better Stability

The 1.5-inch high clearance bend is the key here. It keeps you from dragging your suspension through rocks and debris that would otherwise catch you up. The 1.5-inch rear offset also works in your favor—it pushes your tires out a bit more, which means better stability when you're cornering and space for bigger, more aggressive tires if that's what you want.

Built Strong

SuperATV made these arms with 1.25-inch diameter tubing, which is about 25% thicker than what came on your machine from the factory. That extra bulk means real strength when you're dealing with branches, rocks, and all the abuse the trail throws at you. The tubing's wrapped in UV-resistant powder coating to keep rust at bay, and you get preinstalled UHMW bushings that don't wear out and give you smooth, quiet pivot movement every time.

These come with a lifetime warranty, so SuperATV stands behind them.

Adjust Your Camber When You Need To

They arrive set to stock specs, but you can dial in your camber angle whenever you want. If you add a lift later or change how your machine sits, adjusting camber keeps your tires wearing even and your handling sharp. It only takes a few minutes to dial in the angle that works for your setup.

What Fits

• Polaris RZR Trail S 900: 2021+

Note: You'll need Rhino Axles to run these.