Polaris RZR XP 900 Plow Pro Snow Plow

When winter rolls around, your RZR XP 900 can handle snow clearing work instead of sitting idle. This snow plow kit mounts to your winch and features a 72" blade that moves through multiple angles to cut through packed snow and move it out of the way. The blade connects and disconnects quickly, so you can swap it on or off in minutes depending on the job at hand.

Snow plowing is hard on equipment, so this kit doesn't cut corners. The main blade uses 10-gauge steel, while the cutting edge steps up to heavy 4-gauge material that slices through stubborn, compacted snow without bogging down. The whole assembly sits on shock-absorbing springs and tilts forward when it hits bumps or debris, so you keep moving without getting hung up. The frame gets extra reinforcement from two 4-gauge vertical ribs and a 10-gauge horizontal brace running behind the blade for added durability where impacts happen most.

This plow adjusts to seven different positions—0°, 10°, 20°, and 30° left or right of center—so you can work into tight corners and hard-to-reach spots. The cutting angle itself adjusts between 52° and 65°, and you can raise or lower the skid shoes to protect the ground surface underneath. You stay in control the whole time, which beats guessing at the right angle.

The bolt-on quick-connect mount needs no drilling and fastens straight to your machine. Small and light enough that you can leave it mounted year-round, so when snow hits, you just snap the blade on and start working.

SuperATV also makes a deluxe accessory kit that includes side shields (3/16" steel), marker posts (23" tall) to keep your plow visible, a deflector (1/8" LDPE) to stop snow from rolling over the top of the blade, and an angle actuator with an 1,800 lb. push that lets you change the blade angle from inside your cab using a dash-mounted switch.

• 72" snow plow blade
• Quick-connect mounting system
• Plow frame with reinforcement ribs and bracing

Important: You'll need a working winch to operate this plow. If your machine runs more than 3" of suspension lift, you'll also need our Plow Prow drop bracket (SPB-DB-001), sold separately.

• Polaris RZR XP 900 (2011–2014)
• Polaris RZR XP 4 900 (2012–2014)