Polaris RZR XP Turbo Plow Pro Snow Plow

Got snow to move? A 72" plow blade mounted to your Polaris RZR XP Turbo makes quick work of driveways, parking areas, and trails. This winch-powered system lets you angle the blade seven different ways—from dead straight to 30 degrees left or right—so you can push snow where it needs to go. The whole blade bolts on without drilling, and the quick-connect design means you can take it off or reattach it in minutes when you're done for the season.

Built Heavy-Duty for Real Work

Snow plowing is rough on equipment, so this blade is made to take it. The main body uses 10-gauge steel, and the cutting edge—the part that actually bites through hard-packed snow—is 4-gauge advanced steel alloy. To keep everything from flexing or bending under load, SuperATV reinforced the blade with internal ribs and gussets at high-stress points. You also get shock-absorbing springs and a tilt-forward design that lets the blade flex over bumps and small obstacles instead of jarring to a stop.

What you're getting:

• 10-gauge steel blade body
• 4-gauge leading edge (cutting edge)
• Two 4-gauge vertical support ribs
• 10-gauge horizontal reinforcement along the front
• Tilt-forward flex design with shock-absorbing springs

Angle It Seven Ways

Push straight ahead or angle the blade 0°, 10°, 20°, or 30° to either side. You can also adjust the attack angle (how the blade sits relative to the ground) between 52° and 65°, and height-adjustable skid shoes let you fine-tune how close the blade cuts. More angles mean less repositioning—you handle more snow from each pass.

What Comes In The Box

• 72" snow plow blade
• Quick-connect mounting frame
• Snow plow mount bracket

Optional Deluxe Accessory Kit

Want to make plowing easier? Add the deluxe kit for side shields, blade markers, a deflector, and an angle actuator. The two 3/16" steel side shields keep snow off the sides of your plow line. The 23" markers make the blade edges visible in whiteouts. The 1/8" LDPE deflector stops snow from rolling over the top. And the plow angle actuator—powered by an 1,800 lb. electric motor—lets you change blade angle from a dash-mounted switch, so you stay warm in the cab.

Important: You need an existing winch to run this plow. Your RZR must already have one installed.

Fitment Notes

• Fits: Polaris RZR XP Turbo (2016–2021) and Polaris RZR XP 4 Turbo (2016–2021)
• Lift compatibility: If your machine has more than 3" of lift, you'll need our Plow Prow Snow Plow drop bracket (SPB-DB-001), sold separately
• Bumper: Does not fit with Polaris High Coverage Bumper #2884732-293