Can-Am Defender HD10 Track Bars

When you've upgraded your Defender HD10 with big tires, forward-offset A-arms, and portal gearboxes, you're putting serious stress on the stock suspension geometry and frame connection points. A track bar ties everything together and keeps your suspension geometry solid when things get rough. Without proper bracing, your A-arms can flex and bind, and your frame takes a beating.

Built for Real Work

These track bars use heavy-duty DOM steel tubing with quality heim joints and a stout 3/16" steel frame mount. That combination gives you nearly twice the bracing strength of a basic support bar, with pivot points that won't flex or fail when you're crawling rocks, climbing hills, or hammering through broken terrain. SuperATV engineered these to handle the abuse a serious Defender HD10 sees.

Full Travel Without Binding

A lot of track bars restrict your suspension travel or dig into ground clearance. These use a three-point geometry setup with dual-axis design, so the bar follows your A-arms through their complete range of motion without fighting the suspension. You get the reinforcement you need and keep all your wheel travel and clearance intact.

Easy Install, Tucked Design

Installation uses clamps that bolt on without welding—no cutting or fabrication required, though some drilling into the frame is needed. The bars sit low and out of the way, so they won't interfere with your ground clearance or stick out where they'll get torn up on the trail.

What Fits

• Can-Am Defender HD 10: 2016+
• Can-Am Defender HD 10 6x6: 2020+
• Can-Am Defender HD 10 DPS: 2016+
• Can-Am Defender HD 10 Limited: 2020+
• Can-Am Defender HD 10 Mossy Oak: 2018+
• Can-Am Defender HD 10 Pro: 2020+
• Can-Am Defender HD 10 XMR: 2018+
• Can-Am Defender HD 10 XT: 2016+
• Can-Am Defender HD 10 XT Cab: 2016+
• Can-Am Defender HD 10 XTP: 2018+
• Can-Am Defender MAX HD 10 DPS: 2017+
• Can-Am Defender MAX HD 10 Limited: 2020+
• Can-Am Defender MAX HD 10 Lone Star Edition: 2018+
• Can-Am Defender MAX HD 10 XMR: 2019+
• Can-Am Defender MAX HD 10 XT: 2017+
• Can-Am Defender MAX HD 10 XT Cab: 2017+

Note: Works only with the Atlas Pro 2 Forward Offset A-Arms and Atlas Pro BFT Suspension Kit. Some drilling required for frame mounting.