Can-Am Defender HD8 Track Bars

When you start adding bigger rubber, portals, or beefed-up A-arms to your Defender HD8, you're putting real stress on the suspension frame and mounts. Without proper bracing, all that extra load has nowhere to go but into weak points. Track bars solve this by tying your suspension together and giving the whole system the backbone it needs to handle hard riding and rough ground.

Built to Take a Beating

These bars are made from thick DOM steel tubing with heavy-duty heims and a 1/8" frame-mount plate. That setup roughly doubles your suspension strength compared to stock and creates solid pivot points that won't flex or give when you're pushing hard. They're built to work with your 2 Forward Offset Atlas Pro A-Arms and BFT Suspension Kit, reinforcing both the arms themselves and how they bolt to the frame.

Moves With Your Suspension, Not Against It

The trick here is that bracing bars can't be rigid — your suspension needs to move through its full travel. SuperATV's Double Axis Technology lets these bars articulate with your suspension instead of binding or fighting it. The 3-point geometry keeps everything tucked and positioned so you don't lose ground clearance, and the bars stay out of the way when your suspension is working hard on the trail.

Simple Install, No Welding

You get durable clamps that bolt on securely without cutting or welding anything. The design sits cleanly underneath without creating extra obstacles to snag or worry about. Some drilling is required for installation. You'll need the compatible Atlas Pro BFT Suspension Kit, sold separately.

What Fits

• Can-Am Defender HD 8 : 2016-2021
• Can-Am Defender HD 8 DPS : 2016-2021
• Can-Am Defender HD 8 XT : 2016-2021
• Can-Am Defender HD 8 XT Cab : 2016-2021
• Can-Am Defender MAX HD 8 : 2017-2021
• Can-Am Defender MAX HD 8 DPS : 2017-2021
• Can-Am Defender MAX HD 8 XT : 2017-2021
• Can-Am Defender MAX HD 8 XT Cab : 2017-2021