Yamaha Wolverine RMAX 1000 High-Clearance Rear A-Arms

Stock lower A-arms on your Yamaha Wolverine RMAX 1000 can snap or bend when you hit stumps, rocks, or rough terrain hard. That means a long walk back or a costly tow. These reinforced lower A-arms fix that problem—they're built tougher so you can keep riding instead of worrying about damage.

SuperATV makes these from 1.5" diameter tubing and adds a dual-bend design that lifts the arms higher off the ground. You get roughly 1.5" more clearance between the arms and obstacles, so you roll over rocks and logs without catching anything. The adjustable pivot blocks let you dial in your camber angle too, which keeps the ride smooth and prevents uneven tire wear as you add weight or change your setup.

What You're Getting

The kit includes the pair of lower A-arms and the adjustable pivot blocks. They come pre-set to factory specs, so you can bolt them on and ride if that works for you. If you want to fine-tune the camber later, the blocks are easy to adjust—no special tools or machine work needed.

Built to Take a Beating

The 1.5" tubing handles hard hits and flexes without cracking. Everything gets a UV-resistant powder coat finish to resist rust and sun damage on the trail, so they'll hold up for years. You also get a lifetime warranty, which means SuperATV stands behind these even when you push them hard.

What Fits

• Yamaha Wolverine RMAX 2 1000: 2021–2024
• Yamaha Wolverine RMAX 4 1000 Compact: 2021–2024