Yamaha Wolverine RMAX 1000 Plow Pro Snow Plow

When snow starts piling up, your Yamaha Wolverine RMAX can handle the job with a winch-powered snow plow. This 72" blade tilts and angles to cut through wet, packed snow without bogging down your machine. The whole setup bolts on in minutes and comes off just as fast—so you're not stuck with plow gear on your rig when the weather clears.

The kit comes with the 72" cutting blade, a quick-disconnect mount that lets you swap it out in moments, and the frame that ties everything to your Yamaha. If you want to add the deluxe accessories later, you get side shields to keep your plow line tight, a pair of 23" markers so people see your blade edges, a deflector to stop snow from flying over the top, and an angle actuator that lets you work the blade from inside the cab with a dash switch instead of reaching outside.

Snow plowing is hard on metal, so SuperATV built this one to take the punishment. The main blade is 10-gauge steel with a 4-gauge hardened steel leading edge that bites through stubborn snow. Two vertical ribs and a horizontal support beam run along the back to stop the blade from flexing or buckling. Springs absorb the shock when you hit small rocks or obstacles, and the blade tilts forward so nothing stops you cold. Every bolt, bracket, and connection gets powder coat protection against rust.

You can angle the blade left or right—0°, 10°, 20°, or 30° in either direction—to reach tight corners and awkward spots. The attack angle (the bite of the leading edge) adjusts from 52° to 65°, and the skid shoes are height-adjustable so the blade stays flat on the ground even if your machine sits up to 3" higher. This gives you tons of flexibility to cut clean without leaving windrows.

Everything bolts straight to your Wolverine with no drilling needed for the main mount. Keep the whole rig on your machine all winter and just clip the blade on when a storm hits. You'll need a functional winch to operate the plow.

• Yamaha Wolverine RMAX 2 1000: 2021+
• Yamaha Wolverine RMAX 4 1000 Compact: 2021+
• Yamaha Wolverine RMAX 4 1000 (w/ dump bed): 2025+

Note: If your machine has more than 3" of lift, you'll also need the Plow Pro Snow Plow drop bracket (SPB-DB-001), sold separately.